3-layer shock-absorbing pad iron

3-layer shock-absorbing pad iron iron is also known as 3-layer shock-absorbing pad iron foot,3-layer shock-absorbing pad iron block,etc.There are two structural forms of 3-layer shock-absorbing pad iron iron products:two-layer and three-layer,which are used for supporting installation and adjusting the level of machine tool equipment.The installation of the machine tool does not require the installation of anchor bolts to fix it to the ground,providing good vibration reduction and equivalent vertical deflection,making the machine tool stable on the ground.Save installation costs and shorten installation cycles.The machine tool position can be changed at any time according to production,and the cost of secondary installation makes it possible to install the machine tool upstairs.It can adjust the level of the machine tool,with a large adjustment range and convenience.The shock absorber pad is made of nitrile synthetic rubber,which is resistant to grease and coolant.

Purpose of adjusting shim:support installation and adjustment of machine tools.

Scope of application for adjusting shim:metal processing machines,forging machines,textile machinery,printing machinery,food processing machinery,rubber machinery,wire manufacturing machinery,cable machinery,packaging machinery,generators,and heavy equipment.

Adjustment of pad iron usage method:Place the required shock-absorbing pad iron under the foot hole of the machine tool,insert the bolt,rotate it until it is in solid contact with the load-bearing plate,and then adjust the machine tool horizontally(rotate the bolt clockwise to raise the machine tool);After adjusting the level of the machine tool,tighten the nut and fix it in a horizontal position.Due to the creep phenomenon of rubber,the level of the machine tool should be adjusted once every two weeks after the use of the shock-absorbing pad iron.

Adjusting the characteristics of the pad iron product:This product is made of gray iron casting,with shock-absorbing rubber underneath.The appearance of this product is beautiful,the structure is reasonable,and the shock-absorbing performance is superior.The shock-absorbing rubber attenuates the vibration of the machine itself,reduces the transmission of vibration force,and prevents the transmission of vibration force.The processing size accuracy and quality are also improved.Control the resonant propagation of vibration forces and noise in building structures.The installation of the machine tool does not require the installation of anchor bolts to fix it to the ground,providing good vibration reduction and equivalent vertical deflection,making the machine tool stable on the ground.Save installation costs and shorten installation cycles.The machine tool position can be changed at any time according to production,and the cost of secondary installation makes it possible to install the machine tool upstairs.The shock-absorbing pad iron can adjust the level of the machine tool,with a large adjustment range and convenience.The shock-absorbing rubber pad is made of nitrile synthetic rubber,which is resistant to grease and coolant.