Machine Tool Cushion

The Machine Tool Cushion iron is placed under the machinery to support the weight of the machinery. It has the functions of shock absorption and support, and is commonly used in CNC machine tools.

There are mainly: s78-10, s78-9, s78-7, s78-6. Among them, S78-10, S78-9 are adjustable damping pads, S78-6 is adjustable pad, and S78-7 is damping pad.

Characteristics of Machine Tool Cushion iron products:

The damping rubber attenuates the vibration of the machine itself, reduces the transmission of vibration force, prevents the transmission of vibration force, and improves the precision and quality of machining dimensions. Control the resonant propagation of vibration forces and noise in building structures. Make various types of rough and precision machining machine tools form production units to adapt to the development of logistics technology.

The installation of the machine tool does not require the installation of anchor bolts to fix it to the ground, providing good vibration reduction and equivalent vertical deflection, making the machine tool stable on the ground. Save installation costs and shorten installation cycles. The machine tool position can be changed at any time according to production, and the cost of secondary installation makes it possible to install the machine tool upstairs. The Machine Tool Cushion iron can adjust the level of the machine tool, with a large adjustment range and convenience,. The shock-absorbing rubber pad is made of nitrile synthetic rubber, which is resistant to grease and coolant.

purpose

Instructions for using Machine Tool Cushion iron: Place the required Machine Tool Cushion iron under the foot hole of the machine tool, insert the bolt, rotate it until it is in contact with the load-bearing plate, and then adjust the level of the machine tool (rotate the bolt clockwise to raise the machine tool); After adjusting the level of the machine tool, tighten the nut and fix it in a horizontal position. Due to the creep phenomenon of rubber, the level of the machine tool should be adjusted once every two weeks after the use of the Machine Tool Cushion iron.

Characteristics of Machine Tool Cushion iron product: This product is made of gray iron casting, with shock-absorbing rubber underneath. The appearance of this product is beautiful, the structure is reasonable, and the shock-absorbing performance is superior. The shock-absorbing rubber attenuates the vibration of the machine itself, reduces the transmission of vibration force, and prevents the transmission of vibration force. The processing size accuracy and quality are also improved. Control the resonant propagation of vibration forces and noise in building structures. The installation of the machine tool does not require the installation of anchor bolts to fix it to the ground, providing good vibration reduction and equivalent vertical deflection, making the machine tool stable on the ground. Save installation costs and shorten installation cycles. The machine tool position can be changed at any time according to production, and the cost of secondary installation makes it possible to install the machine tool upstairs. The Machine Tool Cushion iron can adjust the level of the machine tool, with a large adjustment range and convenience. The shock-absorbing rubber pad is made of nitrile synthetic rubber, which is resistant to grease and coolant.