Three-Level Leveling Adjuster

Three-Level Leveling Adjuster to save installation costs and shorten the installation cycle. The machine tool position can be changed at any time according to production, and the cost of secondary installation makes it possible to install the machine tool upstairs. The shock-absorbing pad iron can adjust the level of the machine tool, with a large adjustment range and convenience. The shock-absorbing rubber pad is made of nitrile synthetic rubber, which is resistant to grease and coolant.

Adjusting the usage of the shim:

Place the shims under the machine tool, apply force to each shim, and then Adjusting Pads. Adjustable height of 3mm -15mm adjustable pad iron performance and characteristics: easy installation and adjustment, flexible migration, no need to drill holes to bury anchor screws, no damage to the ground, which is a major reform in the installation process of machine tool equipment. It can exhibit the same dynamic characteristics as the bed, improve the machining accuracy of the machine tool, and has the functions of shock resistance and noise reduction. Save labor, time, materials, and overall economic benefits. Solved the contradiction of uncertain ground foundation caused by equipment selection difficulties for the design department. Widely applicable, suitable for installing various machine tools and equipment in ground and upstairs workshops.

Adjust the selection of shim:

1. The weight of the machine tool and the number of fastening holes on the machine tool base;

2. The bearing capacity of each shim is equal to the total weight of the machine tool divided by the number of fastening holes; (If conditions permit, consider the center of gravity position of the machine tool and determine the weight distribution)

3. Choose the desired result based on the type of machine tool used;

4. Check if the diameter and length of the machine tool base holes and bolts match.

Scope of application for adjusting shim: metal processing machines, forging machines, textile machinery, printing machinery, food processing machinery, rubber machinery, wire manufacturing machinery, cable machinery, packaging machinery, generators, and heavy equipment.