Plain Plug Gauge

Plain Plug Gauge and measuring gauge product specifications:various smooth plug gauges IT6 level or above(including level 6)with diameters ranging from 1.6 to 320mm,various smooth ring gauges,and watch rings with diameters ranging from 8mm to 400mm,with an accuracy of±0.002.Smooth is a product with a temperature of 20℃and zero force measurement.

Plain Plug Gauge is a precision measuring tool used to measure the internal dimensions of workpieces.Its full name is"Smooth Limit Hole Gauge".This product is made into large and small limit sizes,with one end of the small limit size called the through end and the other end of the large limit size called the stop end.

Plain Plug Gauge features:

1.The standard conditions for smooth plug gauge measurement are:temperature of 20℃and zero measuring force;

2.The gauge used to check the physical dimensions of the workpiece(i.e.,the hole is small and the axis is the size)is called a gauge.The gauge used to check the small solid size of workpieces is called a stop gauge;

3.The gauges that comply with the size judgment principle(i.e.Taylor's principle)are as follows:the measuring surface of the gauge should be a complete surface corresponding to the shape of the hole or shaft(usually referred to as a full gauge),with a size equal to the physical size of the workpiece and a length equal to the fitting length.The measuring surface of the gauge should be point like,and the size between the two measuring surfaces should be equal to the small solid size of the workpiece.A gauge that conforms to the Taylor principle can be used in situations where it is inconvenient or difficult to apply,provided that the shape error of the inspected workpiece does not affect the fitting properties.A gauge that deviates from the Taylor principle can be used;

4.Use a gauge that meets this standard to inspect the workpiece.If the pass gauge can pass but the stop gauge cannot pass,the workpiece should be considered a qualified product;

5.When the manufacturer inspects the workpiece,the operator should use a new or less worn gauge;The inspection department should use the same form of gauge as the operator,which has been worn out a lot.When the user representative inspects the workpiece with a measuring gauge,the general gauge should be close to the physical size of the workpiece,and the stop gauge should be close to the small physical size of the workpiece;

6.Use a gauge that meets this standard to inspect the workpiece.If there is a dispute in the judgment,the following size gauges should be used to resolve it;The gauge should be equal to or close to the physical dimensions of the workpiece;The stop gauge should be equal to or close to the small solid size of the workpiece.

The material of the smooth plug gauge is mainly bearing steel,and Gcr15 has similar characteristics.Plain Plug Gauges with irregular specifications can be customized.Plain Plug Gauges with a diameter greater than 65 can be made into two shapes:single head incomplete type and plug plate,with the aim of reducing weight and facilitating use.

Plain Plug Gauge is a measuring tool used to measure the internal dimensions of workpieces.Plain Plug Gauges are available in both large and small sizes.Its small-sized end is called the through end,and the large-sized end is called the stop end.In measurement,the through end plug gauge should pass through the small diameter,and the stop end plug rule should not pass through the small diameter.Plain Plug Gauge specifications:Ø3-Ø500mm,models can be customized.

The plug gauge consists of a through gauge and a stop gauge.Generally,the through gauge is 15mm long and the stop gauge is 10MM long.Because the through gauge needs to pass through the tested hole,it needs to be longer,and the length of the through gauge depends on the length of the tested hole.