T-Slot Cast Iron Table

The T-Slot Cast Iron Table is mainly used to fix workpieces and serves as a basic work platform for fitters to debug, assemble, and maintain equipment.......

Heavy-Duty Industrial Workbench Mold Table Bench with Vise

WhatsAPP：8615632760017

Email:bozhongliangju@163.com

CONTACT ABOUT

PRODUCT DETAILS

The T-Slot Cast Iron Table is mainly used to fix workpieces and serves as a basic work platform for fitters to debug, assemble, and maintain equipment.

T-Slot Cast Iron Table material: High strength cast iron HT200-300 with a working face hardness of HB170-240. After two manual treatments (manual annealing at 600-700 degrees and natural aging for 2-3 years), the product has stable accuracy and good wear resistance.

T-shaped slot flat plate specifications: 100 * 100-3000 * 6000, (special specifications are made according to the buyer's drawings.)

Precision of T-Slot Cast Iron Table: According to the national standard metrological verification regulations, it is divided into four levels: 0, 1, 2, and 3.

The working surface of the T-Slot Cast Iron Table adopts scraping technology, and V-shaped, T-shaped, U-shaped grooves, dovetail grooves, circular holes, long holes, etc. can be machined on the working surface.

T-Slot Cast Iron Table, also known as T-shaped groove assembly platform, cast iron T-shaped groove platform, T-shaped groove welding platform, T-shaped groove riveting platform, is a cast iron basic working platform used for product assembly, welding, welding, riveting, and assembly. Its purpose is to facilitate product assembly, welding, riveting, and production, and to improve the accuracy, flatness, angle, and straightness of the finished product. T-slots are used to secure workpieces and products, facilitating positioning, marking, measurement, and other tasks.

The manufacturing material of the T-Slot Cast Iron Table is cast iron HT200-HT300.

The manufacturing standard for T-Slot Cast Iron Tables strictly follows the relevant requirements of GB/T 22095-2008.

Technical Parameter：

Specifications	Accuracy class μm					Specifications	Accuracy class μm
Level 0	Level 1	Level 2	Level 3	Fine plane	Level 0	Level 1	Level 2	Level 3	Fine plane
100×100	4	8	26			2500×2500			72	180	270
200×100	5	10	20			3000×1000				168	248
200×200	5	10	20			3000×1500				174	154
300×200	6	12	24			3000×2000				184	275
300×300	6	12	24			3000×2500				186	276
400×300	6	12	24			3000×3000				210	300
400×400	6	12	24			4000×1000				210	300
500×300	6	12	24			4000×1500				210	300
500×500	7	14	28			4000×2000				219	310
600×400	7	14	28			4000×2500				228	340
600×500	7	14	28			4000×3000				240	360
800×500	8	16	32	80		5000×1500				249	370
800×600	8	16	32	80		5000×2000				255	375
900×600	8	16	32	80		5000×2500				264	390
1000×750	9	18	36	90		5000×3000				287	420
1000×1000	10	20	39	96		6000×1500				287	420
1200×1000		20	39	96		6000×2000				293	430
1500×1000		24	48	120		6000×2500				300	450
1500×1500		25	50	125		6000×3000				308	460
2000×1000		26	52	129		8000×1500				366	500
2000×1500			56	140		8000×2000				370	520
2000×2000			60	152	230	8000×2500				375	530
2500×1500			64	152	230	8000×3000				382	570

Note:1. The values in the table are given according to the standard temperature of 20 ℃.2. In the formula in the table: D ---- diagonal length of flat plate working face, mm.3. The flatness tolerance within the range of 0.02A (maximum 20mm) from the edge of the working face is not counted, and any point shall not be higher than the working face.